EN
Te rākau tāwhai CNC tāwhai-pou, te rākau tāwhai CNC tāwhai-horo me ngā rākau tāwhai Fanuc me Siemens, hōu, me ngā wāhanga matua o te rākau tāwhai GSK
- Whakaahuatanga
- Ngā whakaritenga
- Māhina Tirohanga
- Kōrero Hui
Whakaahuatanga:
Te whakamahi o te mahi
1) Ko te whakamāhinga he ā-papa tāwhai, he āwhina whānui me ngā rārangi pūmau, me te whakamāmātanga haumaru katoa. Ko te whakamāhinga kākāriki he whakamāhinga katoa, he tino pūmau, ā, e whakamārama ana i te pūmau o te whakamāhinga me te whakamārama, he māmā te whakamāhinga, me te haumaru pai.
2) I te mea kua whakamahia ki te waewae moenga whakauru, he aratohu supersonic pakeke, he kaha te pakeke me te tika tino pai o tenei mīhini. Rā, waewae moenga, pouaka pūkaha me te waka, etc. I hangaia katoa ki te maka utu nui. Mā te tātari huānga mutunga, i whakaritea ngā rīpene pakeke i runga i te tikanga, nā reira i whakapai ake te kaha tukatuka o te mīhini.
3)E rua ngā momo taputapu pouaka miro hei whiriwhiri, pēnei i: nga tere hurihanga tere 2-taahiraa me nga tere tere-taahiraa kotahi e taea ai te makona i te kaihoko e hiahia ana i te mīhini me te torque nui, te tukatuka tere-tere, etc. Ka hokona te kaari kaari i runga i nga kaari NS
4) He taputapu whakatika rarangi hei whiriwhiri i te mea ka taea te whakarite i te teitei o nga pokapū taputapu, ka pai hoki mo nga taputapu rereke e whakamahia ana i roto i te tukatuka.
5) I tēnei mātua, i te whakamahinga o te rākau āhua pānga, he wāhi mō te kōwhiringa o ngā kiritaki i te pou hāngai me ngā rākau CNC, ā, he wāhi hoki mō ngā kōwhiringa o ngā pou hāngai hei whakamātau, me ngā pou hāngai hūmāriki 10 inehi, 12 inehi, ngā pou taputapu hei whakamātau e 4, ngā pou taputapu pānui pānui horizontal e 6, 8, me ngā pou taputapu tāwhai; ngā rākau whakamātau pērā i ngā pou hāngai, me ngā pou hāngai hūmāriki hei whakamātau. I tēnei hoki, ka taea e tātou te whakamātua i te kōpae rākau māmā hei whakamātau mō ō kōrero.
6) Kua whakamahinga he kaitiaki whakamātua katoa i ēnei mātua. I te whakamahinga o te pānui whakamātua i te kāpā kōkiri, ka neke mai te pānui whakamātua i te tāwhai o te kāpā i te wā anō, ā, ka whakamārama ake i te whakamātua.
Nga taaraitanga:
| Ngā Tuhinga | Whakaritenga | Wāhanga | CK6180 |
| Te hāngaitanga | Te hāngai i te takotoranga | MM | φ800 |
| Te hāngai i te tāwhai | MM | φ550 | |
| Te roa i waenganui i ngā pū | MM | 1500/2000/3000 | |
| Te whānui o te takotoranga | MM | 550 | |
| Te kaha uta maksimum | Te | 3 | |
| Pūkete | Te whakamātautau i te pū | MM | φ104 |
| Te pū o te tapa kōnawa | - | Te pū metriki Φ120 /MT5 | |
| Momo mata pūkaha | - | A2-11 | |
| Te hāere o te pū, ngā whakamātautau | - | Te whakamātautau ā-ringa, te whakamātautau i ngā tauira e toru | |
| Horahanga pūkoro | RPM | 10-1000 | |
| Te rahi o te kōkō | MM | φ315 | |
| Momo Kari | - | ngā mātā ā-ringa e toru | |
| TURRET | Te āhua o te pūkoro | - | Te tāwhai NC i ngā wāhi e whā |
| Te rahi o te hāngā o te tapa | MM | 12:32 | |
| Kawe | Te haere i te awhi rāhui X | MM | 420 |
| Te haere i te awhi rāhui Z | MM | 1350/1850/2850 | |
| Te hāere tūtahi o te awhi rāhui X | Mm/min | 4000 | |
| Te hāere tūtahi o te awhi rāhui Z | Mm/min | 6000 | |
| PUNAHIKA | Te whānui o te kōrero o te kōpae | MM | φ100 |
| Te whakamāmā o te kōpae | - | MT5 | |
| Te haere o te kōpae | MM | 250 | |
| Pūmotu | Mōhini pūkete matua | KW | 11 |
| Te pūmau wai mātātoko o te mōtāhi | KW | 0.125 | |
| Rahi | Te whanui x te hāpori | MM | 1850:1900 |
| Te roa ā-hau | MM | 3900/4400/5400 | |
| Taumaha | Taumata Whētau | Te | 4.3/4.7/5.4 |
Ngā Taputapu Tīmatanga:
1. te pūnaha wai whakamāori katoa hei whakamāhi i tēnei wā
2. te pūnaha whakamāori katoa hei whakamāhi i tēnei wā
3. Te rākau mahi LED
te kōhanga ā-ringa ā-tāwhai ā-tāwhai e toru ngā kōpae
te kārihi ā-hiko mō ngā taputapu e rima mā whā
6. Poutuākau ā-ringa
ngā pouaka taputapu me ngā taputapu
8. Te whakamārama o GSK
Ngā taponga kōwhiri:
te rākau ā-mātua mō ngā wāhanga tāwhai roa
te kōhanga whakawhitinga pāpā
te kōhanga ā-hydraulic, te pūnaha ā-hydraulic, te rorohiko huri (ā-tauā, he āhua kōpū, he āhua kōpū kore)
te whakamātau pūmau
te whakamātau whai
6. te kōpae taputapu e ono
7. te whakamārama o Siemens/Fanuc
Ngā Mātai Tārua:
 |
|
|
Te rākau o te pūrere me te kōhanga
Ko tēnei whakaahua e whakaatu ana i te te pūkaha me te pūkaha ā-ringa e toru nga waha o te CK6180 CNC lathe. He diameter o te pūtāhui o te φ104mm me te taera o te MT5, i te mea ko te pūtāhui φ315mm e whakarato ana i te whakapiri haumaru mo nga waahanga mahi taumaha tae atu ki te 3 tana.
|
He pourewa me te pou taputapu
Hei tēnei te Te tāwhai NC i ngā wāhi e whā me te rahi o te hapū taputapu o te 12:32. Ka taea e ia te huri taputapu tere me nga mahi miihini whai hua, e tautoko ana i te hua nui mo nga tukanga huri.
|
|
|
 |
|
Te whakakotahitanga o te taera
Kei roto i te huinga tailstock he pene me te diameter o φ100mm, MT5 taper, me te 250mm haere. Ka whakaratohia e ia he tautoko pūmau mō ngā wāhanga mahi roa i te wā o te mīhini, e whakarite ana i te tika me te pakari.
|
Kōpae whakahaere mātai
Ko te mīhini tēnei kōpae whakahaere mātai , e noho ana i te pūkaha pūkaha pūkaha matua, te pūngao papu hau mātao, me ngā wāhanga PLC. Ka whakarite i te tohatoha mana pono me te mahi pūmau o te pūnaha aunoa o te lathe.
|
Whakataki Kamupene:
KEI ZAOZHUANG WOJIE CNC MACHINERY Co., LTD.:
1. Neke ake i te 60,000m² te rahinga o te wharepuoro me neke ake i te 150 kaimahi.
2. Whakahaere tata ki te QC me te neke ake i te 24 ngā tahumaero whakamātautau.
3. Wharepuoro manawhaki mō te neke ake i te 30 tau wheako hangarua CNC.
4. Ratonga ipurangi 24 haora pea i te wā kotahi.
5. Hoko tāpoi hokohoko ki neke ake i te 150 whenua kei te ao.
6. Mahi tahi me ngā tohu rongonui, pērā i SIEMENS, FANUC, SYNTEC etc.
7. Tautoko ODM OEM.
8. Te wā whakapuaki ko te 24 marama.
Mātou e whai kounga ake ngā mīhini, ā, he aakene ake, he whai aroha ake ngā ratonga muri i te hoko ki ngā kiritaki. He hiahia nui ki te whakawhitinga kōrero me ngā hoa mai i ngā whenua rereke, ka tūhono ai ki te mahi tahi anuanu.
FAQ:
1. He aha ngā tikanga utu?
A : T/T, utu 30% kei te wā o te tono, utu 70% mātātoko i mua i te tuku;
LC whakakorekore ki te karu. Ka tīmata tā mātou huringa whenua i te wā ka riro mai te utu ārautanga,
ka tīmata tā mātou hānganga. ina rite te māhinā, ka tango mātou i ngā pikitia kia tūhono ki a koe.
i muri i tōu utu tuarangi, ka tuku mātou i te māhinā ki a koe.
2. He aha ō koutou tikanga hokohoko?
A : Ko FOB, CFR me CIF e whakaaetia ana katoa.
3. Cno te wā tukunga?
A: Mēnā ko te māhinā e tono ana koe he māhinā standatia,
ka taea e mātou te rite ki te māhinā i roto i ngā 15 ra.
mēnā he ētahi māhinā motuhake ka roa ake anō.
Ko te wā hui he rārangi 30 ki Ūropi, Amerika. Mēnā koe i Awherika, tae atu rānei ki Ōwhiā, ka poto ake.
Ka taea e koe te tuku ota e ai ki te wā tukuatu me te wā hui. Ka hoatu e mātou ki a koe te whakahoki e hāngai ana.
4. He aha ō koutou tikanga hokohoko?
A : Ko FOB, CFR, CIF, nāwai rānei ngā tikanga e whakaaetia ana katoa.
5. He aha tō koutou kaha iti rawa e tono ai me te tiwhikete?
A: Ko te MOQ kotahi takitimu, me te tiwhikete kotahi tau. Engari ka tukuna e mātou te ratonga roanga o te ao mō te māhinā.
6. He aha te pūkoro mō ngā māhinā?
A: Ko te paereta o ngā mīhini ka pakonga ki te kete ripa rino.
Whai Mai:
